OptimusPrimeR | Grundierung
Water-based airbrush primer. Easy to apply straight from the bottle, dries to a hard matte finish.
Airbrush primer for model making, 3D printing materials, Lexan, wood, PS, PVC, ABS, glass, acrylic glass, plexiglass, brass, nickel silver, shoes, bags.
OptimusPrimer is a primer that can be applied thinly and will therefore not overlay the details on your models.
The primer is available in white, black, gray and transparent.
The transparent primer is ideal as an adhesion bridge for Lexan models. A big advantage of the transparent airbrush primer is that it can be colored with the AIrbrushColor4you colors and you can adjust your personal color.
You will be amazed by our OptimusPrimer.
- Primer can be applied from a nozzle of 0.2 mm
- excellent adhesion properties
- individual color design
Farbton:
White
€5.90Deep Blck
€5.90Grey
€5.90Transparent
€5.90Produktbeschreibung
Water-based airbrush primer. Easy to apply straight from the bottle, dries to a hard matte finish.
Airbrush primer for model making, 3D printing materials, Lexan, wood, PS, PVC, ABS, glass, acrylic glass, plexiglass, brass, nickel silver, shoes, bags.
OptimusPrimer is a primer that can be applied thinly and will therefore not overlay the details on your models.
The primer is available in white, black, gray and transparent.
The transparent primer is ideal as an adhesion bridge for Lexan models. A big advantage of the transparent airbrush primer is that it can be colored with the AIrbrushColor4you colors and you can adjust your personal color.
You will be amazed by our OptimusPrimer.
- Primer can be applied from a nozzle of 0.2 mm
- excellent adhesion properties
- individual color design
Tips for applying OptimusPrimeR primer
OptimusPrimeR should be applied undiluted using an airbrush gun. It is also possible to apply this primer with a brush.
Before applying the primer, the surface to be treated must be carefully cleaned and degreased. The Silicon Cleaner Waterbased is ideal for pre-cleaning and degreasing.
After cleaning and drying the surface to be processed, the OptimusPrimeR is applied thinly using an airbrush. The nozzle size should not be smaller than 0.3 mm in order to obtain a homogeneous surface. The working pressure should be 2 – 2.5 bar. After the primer has dried, the paint can be applied.
