Model Primers

The right primer brings out details and ensures adhesion on plastic, resin, metal and 3D prints. Find primers made especially for model making here.

>

12

Primer | Vallejo

Surface Primer is available in a range of basic shades most frequently employed to prepare the surface of the model or miniature before starting the painting process. Primers can be applied on all surfaces, resin, PVC, brass, white metal or wood. The primer preserving even the smallest detail of a model, and improves the adherence of the colors applied on this base. It is recommended to apply the Primer in various layers; the product dries rapidly and forms a homogenous film of extraordinary strength and resistance within a few hours after application. Surface Primer can be used directly or diluted with Vallejo Airbrush Thinner of Flow Improver. The recommended compressor settings are around 15-20 PSI or 0.5 to 1 kg. For best maintenance of the airbrush, it is recommended to use the Vallejo Airbrush Cleaner.Surface Primer is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.

Content: 0.06 Liter (€115.00 / 1 Liter)

From €3.80

Details

OptimusPrimer Airbrush Modellbau Grundierung - Herterich Products

7

OptimusPrimeR | Primer

Water-based airbrush primer. Easy to apply straight from the bottle, dries to a hard matte finish. Airbrush primer for model making, 3D printing materials, Lexan, wood, PS, PVC, ABS, glass, acrylic glass, plexiglass, brass, nickel silver, shoes, bags. OptimusPrimer is a primer that can be applied thinly and will therefore not overlay the details on your models. The primer is available in white, black, gray and transparent. The transparent primer is ideal as an adhesion bridge for Lexan models. A big advantage of the transparent airbrush primer is that it can be colored with the AIrbrushColor4you colors and you can adjust your personal color. You will be amazed by our OptimusPrimer. Primer can be applied from a nozzle of 0.2 mm excellent adhesion properties individual color design Tips for applying OptimusPrimeR primer OptimusPrimeR should be applied undiluted using an airbrush gun. It is also possible to apply this primer with a brush.Before applying the primer, the surface to be treated must be carefully cleaned and degreased. The Silicon Cleaner Waterbased is ideal for pre-cleaning and degreasing. After cleaning and drying the surface to be processed, the OptimusPrimeR is applied thinly using an airbrush. The nozzle size should not be smaller than 0.3 mm in order to obtain a homogeneous surface. The working pressure should be 2 – 2.5 bar. After the primer has dried, the paint can be applied.

Content: 0.05 Liter (€118.00 / 1 Liter)

From €5.90

Details

-1.11

1

AutoBorne Sealer | Primer

Grundierung für Wasser- und Lösemittelhaltige Basis-Lacke
Kein weiteres Anschleifen der Grundierung notwendig.
Für Aluminium, Plastik, 3 Druck Materialien u.v.m

Content: 0.06 Liter (€148.33 / 1 Liter)

From €8.90 €9.00 (1.11% saved)

Details

-4

1

Gloss Black Primer 660 | Vallejo

Vallejo Black Primer Glänzende schwarze Grundierung auf Wasserbasis. Der ideale Untergrund für die Metal Color Serie. Als Schutzüberzug sollte der Metal Varnish #657 genutzt werden um einen perfekten Glanz zu erreichen.

Content: 0.06 Liter (€120.00 / 1 Liter)

€7.20 €7.50 (4% saved)

Details

4

AERO Grund | Primer Transparent

50 601 - Aero base from Schmincke artist colors Primer for working with Aero Color Professional; ideal for non-absorbent surfaces such as plastic and metal Contains: Aqueous pure acrylate dispersion Characteristics: improve adhesion transparent colorless elastic resistant to light and ageing Processing instructions: Shake before use. AERO GRUND is ready to use. After drying, finely sand and repeat the process if necessary. The product is water-miscible, but dries up insoluble in water.  The product contains a rust protection inhibitor against rust film on sanded metal. Clean tools with water and/or AERO CLEAN RAPID 50606 immediately after use. Optimum results with spray application can be achieved at a processing temperature of 15 to 30 °C, 2 bar air pressure and a nozzle size from 0.15 mm. The product should not be used below 10 °C object and room temperature. Close container immediately after use. Store cool and dry. Protect from frost. Individual pre-tests are recommended

Content: 0.125 Liter (€127.20 / 1 Liter)

From €15.90

Details

-0.66

5092 Flex adhesion promoter | Createx Colors

5092 Flexible Adhesion Promoter (flexible primer promoter)Primer for latex, Lexan, flexible plastics, vinyl, leather etc. Colorless, water-based primer, which is very adhesive, and enables the Createx Bloodline Colors or other water-based colors to adhere to flexible surfaces (latex, flexible plastics, leather, vinyl, etc.) without peeling or tearing. The Flexible Adhesion Promoter is applied directly to the background for this purpose. The promoter is a rather viscous mass that can be injected with the 4011 reducer. Pre-treatment is not necessary. 5092 dries to a clear tacky film with very strong adhesion. Avoid applying the primer that is too dry or too wet. Apply two medium coats of the 5092 directly to the surface and let each coat dry for 10-15 minutes. Then apply the colors after 20 minutes at the earliest, but within 24 hours. When working on a flexible substrate, it is important to apply the paint in many thin layers in order to obtain a strong paint film that does not splinter or peel off. 5092 can also be mixed with paints and applied directly. 5092 is added about 25% by volume to the colors, which are then diluted by 5% - 10% with 4011 Reducer. If enough coats of paint are applied, the tack is lost. Please experiment with mixing ratios and drying times.

Content: 0.06 Liter (€150.00 / 1 Liter)

From €9.00 €9.06 (0.66% saved)

Details

1

Silicon Cleaner | Waterbased

Mild, low-odor water-based degreasing agent for pre-cleaning. Ideal cleaning agent for 3D printing materials and all plastic ovens used in model making and table top areas Suitable for metal and plastic substrates, filled surfaces and sanded old paintwork. Note: The surfaces and colored areas must be dry. VOC-compliant cleaning and degreasing agent

Content: 0.5 Liter (€25.80 / 1 Liter)

€12.90

Details

1K Haftpromoter farblos | Mipa - Spray | 400ml

Deine Auswahl-Varianten: Spray | 400ml

SprayDose | mipa

Content: 0.4 Liter (€34.75 / 1 Liter)

€13.90

Details

Quick Primer Spray | Mipa

Mipa 1K-Haftpromoter is a completely colorless, universal primer. Applications: common plastics in the vehicle sector (e.g. PP-EPDM, ABS, PC, ABS-PC, PMMA, PA, PUR, PVC, GfK)difficult surfaces without prior sandingIt can be used on steel, aluminum (also polished or anodized), galvanized substrates, stainless steel (also polished), non-ferrous metals (also polished), copper, chrome-plated substrates, powder coatings and KTL coatings, stone. The material saves a lot of time thanks to quick drying and paintability, as well as the elimination of grinding work. Can be painted over with Mipa 1K and 2K top coats. Mipa 1K adhesive promoter is colorless and UV-stable and can therefore also be overcoated with Mipa clear coats. Mipa 1K adhesive promoter can be painted over within 2 days.

Content: 0.5 Liter (€35.80 / 1 Liter)

€17.90

Details

Model Primers

Filter

Filter products