5092 Flex adhesion promoter | Createx Colors - 60 ml
Createx 5092 Flex Adhesion Promoter is a clear, highly tacky water-based primer for flexible surfaces such as latex, Lexan, vinyl, leather and flexible plastics. It lets Createx Illustration, Wicked and other water-based paints adhere without chipping or cracking!
€9.00
€9.06* -0.66 %Available
5092 Flexible Adhesion Promoter (flexible primer promoter)
Primer for latex, Lexan, flexible plastics, vinyl, leather etc.
Colorless, water-based primer, which is very adhesive, and enables the Createx Bloodline Colors or other water-based colors to adhere to flexible surfaces (latex, flexible plastics, leather, vinyl, etc.) without peeling or tearing.
- The Flexible Adhesion Promoter is applied directly to the background for this purpose.
- The promoter is a rather viscous mass that can be injected with the 4011 reducer.
- Pre-treatment is not necessary. 5092 dries to a clear tacky film with very strong adhesion.
- Avoid applying the primer that is too dry or too wet.
- Apply two medium coats of the 5092 directly to the surface and let each coat dry for 10-15 minutes.
- Then apply the colors after 20 minutes at the earliest, but within 24 hours.
- When working on a flexible substrate, it is important to apply the paint in many thin layers in order to obtain a strong paint film that does not splinter or peel off.
- 5092 can also be mixed with paints and applied directly. 5092 is added about 25% by volume to the colors, which are then diluted by 5% - 10% with 4011 Reducer.
- If enough coats of paint are applied, the tack is lost.
- Please experiment with mixing ratios and drying times.
| Einsatzzweck: | Lexan & RC, Modellbau, Tabletop, Textil & Leder |
|---|
Login