TopCoat Leather plus SET | 2K-clear coat waterbased - Satin Gloss | Paint & hardener

TopCoat LEATHER plus is a high-quality, water-based clear lacquer for sealing your objects. Quick-drying, water-thinnable clear lacquer for smooth synthetic and leather surfaces.

TopCoat LEATHER plus can be used as a transparent protective varnish on synthetic and real leather. Top Coat plus can be colored with the AirbrushColor4you color series in order to obtain a high-quality 2K paint.

• Glossy or matte
• Can be used as a clear lacquer for synthetic and real leather
• Can be colored with AirbrushColor4you color series

Areas of application of the TopCoat LEATHER plus:

• Top quality water-based clear lacquer sealant
• Repair of car seats, vehicle interior coating of dashboards, door panels, center consoles, etc.
• Restoration of leather objects furniture, shoes, clothes

TopCoat LEATHER plus is a 2K system, when used on synthetic leather materials it can also be used as a 1K paint system without the addition of hardener.

Processing:

• Mixing ratio 5:1
• First stir the hardener well into the paint
• Thinner "Reduce & Clean" 20-25%
• Never dilute with water
• Flash-off time 5-8 minutes between spray coats
• Dust dry 20°: 10-20min, touch dry 25-35min
• Pot life 3h at 20h

When processing without a hardener as a 1K paint system, it is not necessary to add the reducer.

Tip: By mixing the available gloss levels, many other gloss level settings are possible.

Info: Mixing ratio for mixing the "AirbrushColor4you" into the "TopCoat Leather plus"

2 parts clear coat to 1 part color "AirbrushColor4you" = opaque for the first coat of paint
3 parts clear coat to 1 part color "AirbrushColor4you" = opaque after the second coat of paint
For large-area painting, we recommend a mixing ratio of 4 parts clear coat to 1 part paint "AirbrushColor4you"
By diluting with the "Reduce & Clean" to. max 25%, the TopCoat plus can be applied with the airbrush from a nozzle size of 0.4 mm. Better results from a nozzle size of 0.5 mm and larger

Always only very thin spray coats until the desired opacity is achieved.

Tip: By mixing the available gloss levels, many other gloss level settings are possible.

Spreading rate: 25-33 m² / liter

Note: Please carry out preliminary tests and check the color shade.